Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Ibanez SST SRT Output Jack and Battery holder Issues
RIX
#1 Posted : 11/17/2017 5:11:02 AM
RIX


Groups: Member
Joined: 2/8/2010(UTC)
Posts: 496
Man
Location: California
Thanks: 8 times
Was thanked: 56 time(s) in 56 post(s)
I have been troubleshooting some issues with the SST and SRT preamps and found an issue with the Output Jack and Battery holder. That may be the cause of some non working preamps.



What I have found is bad or missing solder.



In the picture above you can see the cold solder that for the LXR connector.



In the picture above missing solder.

Not pictured I also found bad solder on the two caps. I basically went through the whole circuit board on the Output Jack and Battery holder and resoldered each point.

I also found bad soldering in the preamp.



The preamp is now working, but I'm not 100% sure I fixed anything, because I have played with this issue before and the preamp just started working on its own. Time will tell if what I did was a permanent fix.
RIX
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.